UKHAS Wiki

UK High Altitude Society

User Tools

Site Tools


guides:gpsbee

GPSbee

GPSbee from seeedstudio

Image from Seeedstudio

Information

The GPSbee is a GPS package created and sold by seeedstudio. It contains a NEO-5Q Ublox 5 GPS module and is built onto a Xbee style PCB, the module also comes with a miniature GPS patch antenna. The GPS chip used in this package is similar to the one on the fsa03 and will respond to the same commands. The advantage of this module in comparison to the fsa03 is that it is a little more structurally stable and has a standard pinout.

  • Runs at 3.3v (supply will need to be regulated)
  • Power on LED
  • Xbee format requires 2mm headers - skpang
  • Sparkfun produce a good xbee breakout board here and a uk supplier skpang
  • Requires Vcc, GND, Tx and Rx
  • GPS antenna is connected by a IPX/U.FL connector - a larger patch antenna is available from seeedstudio
guides/gpsbee.txt · Last modified: 2011/01/03 07:53 by jcoxon

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki