For Christmas 2014, a good friend of mine bought me a Raspberry Pi and I immediately searched the web for projects I could use it for. Skipping past the usual (and boring) media servers I found several mentions of “High Altitude Ballooning” and “Near Space Flights” and was immediately hooked. What I found mentioned electronics, radio, coding and much more which really appealed to the techy side of me, so I thought I'd give it a go. This page tells the story of my journey from complete novice, to still being a novice but having launched (and recovered) my maiden HAB flight. I won't attempt to replicate or replace all the existing excellent advice already available, but will add my own tips based on my experiences.

If you're reading this, you've already found the U.K. High Altitude Society (UKHAS). Their website has a ton of useful information, most of which is in the wiki and I used this site extensively for research. Secondly I strongly recommend visiting the IRC channel #highaltitude to speak with UKHAS members and ask questions. Everybody is really friendly and without them I would've made many mistakes. Thirdly, I found Dave Akerman's website a great resource too and Dave is often on IRC giving advice. Some of the most useful links I found as a novice are shown below:

https://ukhas.org.uk/general:beginners_guide_to_high_altitude_ballooning https://ukhas.org.uk/guides:how_to_lose_your_flight http://www.daveakerman.com/

From day one I decided I would always try to “build my own” rather than buying off the shelf. To me, the journey was just as important as the end goal so I wanted to enjoy the process of designing and building most things myself. So I discounted pre-built tracking devices immediately. I started by listing my primary objectives:

• Take still photographs of near space
• Take video of near space
• Gather some interesting statistics such as temperature and altitude
• Track the payload position as it flies
• Find my payload after it lands (obvious but not as easy as it sounds)

I have hardly any electronics experience other than wiring the odd plug so decided I should brush up a bit. I bought an “electronics for dummies” book and found it an excellent way to learn the basics. There are many free websites with similar content. When building your own tracker you need a basic knowledge of things like voltage, current, resistance, Ohms law and circuit diagrams. I also taught myself how to solder as this is needed for both the tracker and also some antenna work.

I decided to first focus on my tracker, the thing that would report the position of my flight and hopefully allow me to find it again once landed. My tracker would comprise of:

• A GPS chip and antenna to find position, altitude and time
• One or more temperature sensors to record internal and external temperature
• Voltage detector to report current battery voltage
• Micro SD card to log flight details
• Various LED's to show good/bad status
• A radio transmitter to send position, altitude and sensor readings back down to the ground
• A microcomputer to control all of the above