Differences

This shows you the differences between two versions of the page.

--- projects:hab_modem [2013/08/04 14:55] – [Audio In Cable] kevwal
+++ projects:hab_modem [2020/06/12 19:34] (current) – kevwal
@@ Line 1: / Line 1: @@
 ====== Android HAB Modem and Tracker ======
-This page is a work in progress. Download the app, and for more information, see [[https://play.google.com/store/apps/details?id=com.brejza.matt.habmodem | here]]
+This page is a work in progress. Download the app, and for more information, see [[https://play.google.com/store/apps/details?id=com.brejza.matt.habmodem | here]].
+App seems to no longer be on Google Play, but is available [[https://m.apkpure.com/hab-modem-and-tracker/com.brejza.matt.habmodem/download?from=details | here]].
+Updated version available [[https://github.com/KevWal/HAB-Tracker | here]].
 ===== Decoding Data =====
@@ Line 29: / Line 33: @@
 Typical values of resistor are: R1 = 22K and R2 = 1K, although some experimentation may be needed if these attenuate the signal too much, or if the audio input is not detected by the device.
-[Note, Kevin Walton, 04/08/13, Samsung Galaxy S2 did not recognise the mic with a R2 as 1K, but did recognise a Mic had been plugged in with R2 as 1.5K]
+[Note, Kevin Walton, 04/08/13, Samsung Galaxy S2 did not recognise the mic with a R2 as 1K, but did recognise a mic had been plugged in with R2 as 1.5K, it also required a ferrite filter to reduce the noise.]
 Some phones appear to throw out a lot of RF noise on the audio cable which can cause interference with the radio. Adding a ferrite ring on the cable at the phone side should solve the issue. (Thanks to Jon G8KNN for pointing this out)
+==== Source Code ====
+Source code is available here:
+[[https://github.com/mattbrejza/rtty_modem]]