Differences

This shows you the differences between two versions of the page.

--- guides:tracking_guide [2013/05/17 09:35] – Added FCD Pro+ mfa298
+++ guides:tracking_guide [2015/02/05 22:40] (current) – [Internet] updated urls to tracker.habhub.org lz1dev
@@ Line 5: / Line 5: @@
 Another excellent guide can be found at [[http://projecthorus.org/?page_id=336|Project Horus]]
+===== Translations =====
+  * [[guides:tracking_guide:polish|Polski]]
+  * [[guides:tracking_guide:french|Français]]
+  * [[guides:tracking_guide:spanish|Español]]
+  * [[guides:tracking_guide:german|Deutsch]]
+  * [[guides:tracking_guide:latvian|Latvijas]]
+  * [[guides:tracking_guide:slovak|Slovenský]]
+  * [[guides:tracking_guide:russian|русский]]
@@ Line 55: / Line 63: @@
 There is a 30-sec recording of live data [[http://tenbus.co.uk/icaruscapture_30secs.mp3|mp3 version]] and [[http://tenbus.co.uk/icaruscapture_30secs.wav|wav version]]. These files are about 500kB.
+Please practice decoding in OFFLINE mode to eliminate any confusion with old data from this clip keep appearing on the map! You can do this by unchecking "online" on the "DL Client" dropdown. Settings to decode this should be 425Hz shift, 50 Baud, 8 bit ASCII, no parity and 2 stop bits. Decoding the data should look like [[http://i.imgur.com/QZFBp2h.png|this]].
 Unless you are very close, you won't hear anything unless you have line of sight. This means that the balloon usually needs to be above your horizon.
@@ Line 77: / Line 87: @@
 ==== dl-fldigi ====
-=== Translations ===
-  * [[guides:tracking_guide:polish|Polish]]
-  * [[guides:tracking_guide:french|French]]
-  * [[guides:tracking_guide:spanish|Spanish]]
-  * [[guides:tracking_guide:german|German]]
-  * [[guides:tracking_guide:latvian|Latvian]]
-  * [[guides:tracking_guide:slovak|Slovak]]
@@ Line 92: / Line 93: @@
   * First grab the latest version on the projects page: **[[projects:dl-fldigi]]**
-  * Open up dl-fldigi in //hab// mode (now the default mode for OSX). On first running it'll open up a wizard to help setup dl-fldigi for you.
+  * Open up dl-fldigi in //HAB mode// (now the default mode for OSX). On first running it'll open up a wizard to help setup dl-fldigi for you.
 {{guides:wizard1.jpeg?300|}}{{:guides:wizard2.jpg?320|}}{{guides:wizard3.jpeg?300|}}{{guides:wizard4.jpeg?300|}}
@@ Line 110: / Line 111: @@
 [[guides:old_tracking|Tracking with r85 of dl-fldigi]]
+=== RxID or RSID ===
+Not all of the modes are available using the Auto-config facilities, however there is the RxID facility
+where by each transmission is preceded by a short burst of data that identifies the mode that will follow.
+It also has the feature of being tracked by the AFC so it will also allow the receiver to be adjusted to
+the correct centre frequency.  To select this feature, turn on RxID as below:
+{{:guides:dl-fldigi-rxid.jpg}}
+To setup the configuration for RxID, select the Configure | IDs option:
+{{:guides:dl_fldigi-ids.jpg}}
+Turn on all the modes and select the options required, the "Search all Passband" and "Marker" are good defaults to choose:
+{{:guides:dl-fldigi-rsid.jpg}}
+Finally Save the configuration and close the window, these should then remain as your default settings.
 ===== Internet =====
   * dl-fldigi forwards the strings to the central server.
   * Statistics and data can be found here [[http://habitat.habhub.org/]]
-  * The server does further checks and then will post the points to the [[http://spacenear.us/tracker/|spacenear.us tracker]]
+  * The server does further checks and then will post the points to the [[http://tracker.habhub.org/|habhub tracker]]
+  * You can also track using Google Earth by using the following link http://tracker.habhub.org/track.kml, for more details on how to get the best out of Google Earth see [[:using_google_earth|]]
   * If you wish to try out receiving and decoding data without posting to the central server, then please refer to version specific instructions on the [[projects:dl-fldigi|dl-fldigi project page]].