Differences

This shows you the differences between two versions of the page.

--- guides:inventek-ism300 [2011/07/21 11:56] – upu
+++ guides:inventek-ism300 [2012/06/03 14:41] (current) – Removed the schematic and update re altitude limit upu
@@ Line 3: / Line 3: @@
 {{:guides:ava--ism300f2-c5.jpg|}}
+This module is now end of life and given the altitude limit can no longer be considered suitable for High Altitude ballooning with the newer latex balloons.
 SiRFstarIII™ 20-channel GPS SMD compact module/receiver with enhanced high altitude power saving modes.
@@ Line 20: / Line 21: @@
 External link : [[http://www.inventeksys.com/html/ism300f2-c5-v0004.html|ISM300F2-C5-V0004]]
-===== Eagle Schematics for Breakout Board / device for ISM300F2 =====
-Eagle Schematics for Breakout Board / device for ISM300F2 :\\
-WARNING READ BELOW -> {{:guides:ism300breakout.zip|}} <- WARNING READ BELOW\\
-The breakout board does have a fault:\\ You need to supply VCC to the antenna pin even if you are using an active antenna.\\
-This is missing from the breakout you just need to either correct it on the PCB or run a quick wire from JP2 to the Antenna pin and connect that as per Inventeks datasheet.
-Subtle image here :
-{{:guides:ismbreakout2.jpg|}}