UKHAS Wiki

UK High Altitude Society

User Tools

Site Tools


guides:inventek-ism300

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
guides:inventek-ism300 [2011/07/21 11:54]
upu
guides:inventek-ism300 [2012/06/03 14:41] (current)
upu Removed the schematic and update re altitude limit
Line 3: Line 3:
 {{:​guides:​ava--ism300f2-c5.jpg|}} {{:​guides:​ava--ism300f2-c5.jpg|}}
  
 +This module is now end of life and given the altitude limit can no longer be considered suitable for High Altitude ballooning with the newer latex balloons.
  
 SiRFstarIII™ 20-channel GPS SMD compact module/​receiver with enhanced high altitude power saving modes. SiRFstarIII™ 20-channel GPS SMD compact module/​receiver with enhanced high altitude power saving modes.
Line 20: Line 21:
 External link : [[http://​www.inventeksys.com/​html/​ism300f2-c5-v0004.html|ISM300F2-C5-V0004]] External link : [[http://​www.inventeksys.com/​html/​ism300f2-c5-v0004.html|ISM300F2-C5-V0004]]
  
-Eagle Schematics for Breakout Board / device for ISM300F2 :\\  
  
-WARNING READ BELOW -> {{:​guides:​ism300breakout.zip|}} <- WARNING READ BELOW\\ ​ 
- 
-The breakout board does have a fault:\\ You need to supply VCC to the antenna pin even if you are using an active antenna.\\ ​ 
-This is missing from the breakout you just need to either correct it on the PCB or run a quick wire from JP2 to the Antenna pin and connect that as per Inventeks datasheet. ​ 
- 
-Subtle image here : 
- 
-{{:​guides:​ismbreakout2.jpg|}} 
  
  
  
guides/inventek-ism300.1311249294.txt.gz · Last modified: 2011/07/21 11:54 by upu