This page tracks Launch 4, planning in progress, a foil balloon launch.

Just the one: TTGO TBEAM

Three Energiser Lithium AAA's

• AAA - 1,250 mah, 8g

Duration not tested!

36” Qualatex silver “foil” balloon

Approximate weight of 37g, approximate internal volume of 0.1cu m before envelope stretching.

This means they can lift payloads of approx. 60g (or slightly more if you allow for stretching). However experimenters typically aim for payloads of the order of 20 - 40g per balloon in order to attempt to make them float.

• http://www.randomengineering.co.uk/Random_Aerospace/Balloons.html
• https://ukhas.org.uk/projects:splat

ToDo

Total Payload Weight = ~60g

I looked through the data here: http://ukhas.org.uk/projects:microballoons:data?s[]=foil

and modified the predictor from here: http://ukhas.org.uk/_media/guides:burst3.xls

with a balloon weight of 37g and a burst diameter of about 0.70m for a 'if it bursts' flight.

Therefore, based on my 60g payload, to get an ascent rate of 1m/s = 4g free lift with a 71 min time to burst at 14,260ft. I assume a Descent rate of 5m/s.

Predictor based on Marston launch site here: http://predict.habhub.org/hourly/marston/ or anywhere http://habhub.org/predict/ or http://weather.uwyo.edu/upperair/balloon_traj.html

Flight Document created http://habitat.habhub.org/genpayload/

Doc ID: XX Document: XX

Launching Wednesday 7th August around 10am a single tracker foil launch, from a site near Wellingborough (Northants).

Primary tracker: RFM22B based, $$HABTRK, 434.150Mhz (434138400 on my rx), USB, RTTY, 470Hz Shift, ASCII-7, 50 Baud, Parity none, 1 Stop bit

$$HABTRK, id, time, lat, lon, alt, sats, vinmv, rfm_temp.

Documentation is here: http://ukhas.org.uk/projects:jimbob:launch3

Track it here: http://spacenear.us/tracker/ or http://habitat.habhub.org/mobile-tracker/

Burst predictors are linked from here: http://ukhas.org.uk/guides:balloon_data