guides:electrical_connectors
This is an old revision of the document!
Mini (1.25mm pitch) Molex connectors from Rapid: They say you can crimp them using the crimping tool they sell. This is totally wrong. Instead, strip a short length of wire, solder to the crimp terminal, then bend the ends of the outer crimp over so it will insert into the housing. The open side of the crimp terminal goes with the closed side of the housing. It is still extremely annoying, I don't recommend these connectors.
guides/electrical_connectors.1174489195.txt.gz · Last modified: 2008/07/19 23:30 (external edit)