Differences

This shows you the differences between two versions of the page.

--- projects:high_altitude_slug:software [2006/07/07 10:45] – phatmonkey
+++ projects:high_altitude_slug:software [2008/07/19 23:33] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-====== Software ======
+====== Software documentation ======
+Note: this is mainly for our reference!
 ===== Onboard =====
-The on board software is written entirely in C. Non-realtime IPC is done with a TCP server that repeats back any information sent to it. This makes debugging/monitoring/controlling over a network very simple. Realtime data is stored in shared memory.
+Still being planned
-Note: this is mainly for our reference!
-==== Processes ====
-There are 5 major processes:
-=== main.c ===
-Forks, controls and handles errors from other processes. This also controls the shared memory,
-=== flight.c ===
-This process manages the flight (ie, keeps track of when it is ascending/descending/landed, sends text messages etc) and keeps a list of waypoints. The main waypoint tasks:
-  * Keeping a list of waypoints. Waypoints consist of a position and an optional required altitude.
-  * Calculating "sub waypoints" for circling around to get to required altitudes etc.
-  * Calculating when a waypoint is reached based on GPS position and thresholds
-  * Calculating headings to go in based on the current position and the next waypoint (continuous so it will not drift off course)
-Currently for development, there is a very simple waypoint manager that cycles around a set of waypoints in an array.
-=== roll.c ===
-  * Maintaining straight/level flight.
-  * Calculate current heading
-  * Bank and turn based on heading to next waypoint and current heading
-=== pitch.c ===
-  * Maintain constant airspeed, maybe based on stall speed at current altitude or fixed pitch. Without a pressure sensor, this will have to be done purely with ground speed, so a fixed pitch may be necessary. I shall have to look into attaching a pitot pressure sensor.
-Currently for powered flight development, this process is just maintaining a certain altitude.
-=== gps_reader.c ===
-  * Reads GPS data from gpsd using libgps and sticks it in shared memory.
-==== Libraries ====
-=== attitude.c ===
-  * Calculates roll and pitch attitude (in degrees) from thermopile inputs.
-=== calculations.c ===
-  * Various calculations, currently converts two sets of GPS coordinates to bearings and distances.
-=== client.c ===
-  * Client for server.
-=== logger.c ===
-  * Logs errors and messages.
-=== servos.c ===
-  * Controls servos via i2c.
-===== Possible ground station =====
-To display:
-  * Readings from sensors.
-  * Flight plan and waypoints
-  * Attitude/artificial horizon
-  * Altitude.
-  * GPS position.
-  * Speed.
-  * Rate of descent/ascent.
-  * Payload status (ascending, descending, landed etc).
-  * Raw output from log.
-  * Battery voltages.
-  * Space remaining on disk.
-  * Number of photos taken and, depending on bandwidth, a compressed version of the last image.
-To send:
+==== Other pages ====
+  * [[.software:client]]
+  * [[.software:protocol]]
-  * Cut down.
-  * Take photo.
-  * Change/add to flight plans.
-  * Edit/add to waypoints.
-  * Manual control for emergencies.
-  * Release parachute.