Differences

This shows you the differences between two versions of the page.

--- guides:ublox8 [2016/08/06 22:48] – [Hardware Serial Configuration Example] rharrison1971
+++ guides:ublox8 [2016/09/08 14:47] (current) – upu
@@ Line 18: / Line 18: @@
 **WARNING : uBLOX 8 Chips are rated at 3.3v so you can't just plug this into an 5V Arduino board or a PC serial connection as these run at 5V.**
-You can purchase a seperate level convertor from [[http://www.sparkfun.com/products/8745|Sparkfun]] or use a breakout with the integral level convertor available from [[http://ava.upuaut.net/store|HAB Supplies]].
+You can purchase a seperate level converter from [[http://www.sparkfun.com/products/8745|Sparkfun]] or use a breakout with the integral level converter available from [[https://store.uputronics.com|Uputronics]].
-The MAX-8 Chip, Sarantel antenna and populated breakout boards can be purchased from [[http://ava.upuaut.net/store|HAB Supplies]].
+The MAX-8 Chip, Sarantel antenna and populated breakout boards can be purchased from [[https://store.uputronics.com|Uputronics]].
 ===== Hardware =====
@@ Line 27: / Line 27: @@
-If you want to integrate the units into your own design both modules and antennas are in [[https://www.dropbox.com/s/qytveix714ocw11/Ava.lbr|Ava.lbr]].
+If you want to integrate the units into your own design both modules and antennas are in [[https://github.com/Upuaut/Eagle-Libraries|Ava.lbr]].