Differences

This shows you the differences between two versions of the page.

--- code:ground_control [2008/10/30 15:08] – laurenceb
+++ code:ground_control [2008/11/13 09:50] (current) – laurenceb
@@ Line 1: / Line 1: @@
 ===== Input capture based version =====
 This uses the input capture function on timer1 (atmega168). The ICNC1 bit in the TCCR1B register need to be set to enable oversampling to give more noise tolerance. A second function running approx every 20ms is needed to decrement counter by two and check if counter>=30. If this is the case there is a valid pwm stream and the diff variable can be used to set the pwm output.
 ==== Header ====
 <code c>
-#define enable_ground_control	TIMSK1|=(1<<ICIE1)			//enables the input capture interrupt
+void enable_ground_control();						//enables the input capture interrupt
-#define disable_ground_control	TIMSK1&=~(1<<ICIE1)			//disables input capture interrupt
+void disable_ground_control();						//disables input capture interrupt
+#define PULSE_MIN (s16)(0.001*(float)F_CPU/16.0)			//pwm must be in the range 1 to 2 ms
-#define PULSE_MIN 0.001*F_CPU/8;					//pwm must be in the range 1 to 2 ms
+#define PULSE_MAX (s16)(0.002*(float)F_CPU/16.0)			//due to the bit shift we divide by 16
-#define PULSE_MAX 0.002*F_CPU/8;
+#define GROUND_LED_ON PORTD|=(1<<3)
+#define GROUND_LED_OFF PORTD&=~(1<<3)
+#define GROUND_LED_SET PORTD&(1<<3)
+void run_ground_control();
 </code>
 ====Main code===
 <code c>
-extern volatile u08 counter;						//globals
+#ifdef GROUND
-extern volatile s16 diff;
+#include "main.h"
+extern volatile u08 counter;					//globals
+extern volatile u16 diff;
 ISR(TIMER1_CAPT_vect)
 {
 	static u16 start;
-	if(TCCR1B|0x40)						//start of a pulse
+	if(TCCR1B&0x40)						//start of a pulse
 	{
 		TCCR1B&=~0x40;					//set to trigger on falling edge
-		start=ICP1;					//record start of the pulse
+		start=ICR1;						//record start of the pulse
 	}
 	else
 	{
 		TCCR1B|=0x40;					//set to trigger on rising edge
-		if(!counter&0x80)				//the lock bit isn't set, so we are free to run
+		if(!(counter&0x80))				//the lock bit isn't set, so we are free to run
 		{
-			diff=ICP1-start;			//set the global volatile u16 diff
+			diff=ICR1;					//set the global volatile s16 diff
-			if(start>ICP1)				//our pwm pulse spans a timer overflow
+			if(start>diff)				//our pwm pulse spans a timer overflow
 			{
 				diff+=TOP_COUNT;
 			}
+			diff-=start;
 			if(diff>PULSE_MIN && diff<PULSE_MAX)	//test against criterion
 			{
-				if(counter&0xEF<30)		//30 consecutive  pulses
+				if((counter&(~0x80))<30)			//30 consecutive  pulses
 				{
-					counter+=3;		//the 20ms timer1 overflow subtracts 2 from counter
+					counter+=3;			//the 20ms timer1 overflow subtracts 2 from counter
 				}
 			}
 			else
 			{
-				counter&=0xEF;			//set the last 7 bits to zero
+				counter&=0x80;			//set the last 7 bits to zero
 			}
 		}
 	}
 }
+void run_ground_control()
+{
+	if((~0x80&counter)>=28)
+	{
+		counter|=0x80;								//lock the diff variable using the counter flag bit
+		OCR1B=diff;
+		counter&=~0x80;
+		GROUND_LED_ON;
+	}
+	else
+	{
+		GROUND_LED_OFF;
+	}
+	if(counter&~0x80)								//if the counter variable >0, decrement by 2
+		counter-=2;
+}
+void enable_ground_control()
+{
+	TIMSK1|=(1<<ICIE1);
+	counter=0;
+}
+void disable_ground_control()
+{
+	TIMSK1&=~(1<<ICIE1);
+	GROUND_LED_OFF;
+	counter=0;
+	diff=0;
+}
+#endif
 </code>