UKHAS Wiki

UK High Altitude Society

User Tools

Site Tools


code:ground_control

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
code:ground_control [2008/10/30 15:08]
laurenceb
code:ground_control [2008/11/13 09:50] (current)
laurenceb
Line 1: Line 1:
 ===== Input capture based version ===== ===== Input capture based version =====
 This uses the input capture function on timer1 (atmega168). The ICNC1 bit in the TCCR1B register need to be set to enable oversampling to give more noise tolerance. A second function running approx every 20ms is needed to decrement counter by two and check if counter>​=30. If this is the case there is a valid pwm stream and the diff variable can be used to set the pwm output. ​ This uses the input capture function on timer1 (atmega168). The ICNC1 bit in the TCCR1B register need to be set to enable oversampling to give more noise tolerance. A second function running approx every 20ms is needed to decrement counter by two and check if counter>​=30. If this is the case there is a valid pwm stream and the diff variable can be used to set the pwm output. ​
- 
- 
  
 ==== Header ==== ==== Header ====
 <code c> <code c>
-#​define ​enable_ground_control TIMSK1|=(1<<​ICIE1) //enables the input capture interrupt +void enable_ground_control(); //enables the input capture interrupt 
-#​define ​disable_ground_control TIMSK1&​=~(1<<​ICIE1) //disables input capture interrupt +void disable_ground_control(); //disables input capture interrupt 
- +#define PULSE_MIN ​(s16)(0.001*(float)F_CPU/16.0) //pwm must be in the range 1 to 2 ms 
-#define PULSE_MIN 0.001*F_CPU/​8; //pwm must be in the range 1 to 2 ms +#define PULSE_MAX ​(s16)(0.002*(float)F_CPU/16.0) //​due to the bit shift we divide by 16 
-#define PULSE_MAX 0.002*F_CPU/​8;+#define GROUND_LED_ON PORTD|=(1<<​3) 
 +#define GROUND_LED_OFF PORTD&​=~(1<<​3) 
 +#define GROUND_LED_SET PORTD&​(1<<​3) 
 +void run_ground_control();
 </​code>​ </​code>​
  
Line 17: Line 18:
  
 <code c> <code c>
 +#ifdef GROUND
 +#include "​main.h"​
 extern volatile u08 counter;​ //​globals extern volatile u08 counter;​ //​globals
-extern volatile ​s16 diff; +extern volatile ​u16 diff; 
- +  
 + 
 ISR(TIMER1_CAPT_vect) ISR(TIMER1_CAPT_vect)
 { {
  static u16 start;   static u16 start;
- if(TCCR1B|0x40) //​start of a pulse+ if(TCCR1B&0x40) //​start of a pulse
  {  {
  TCCR1B&​=~0x40;​ //​set to trigger on falling edge  TCCR1B&​=~0x40;​ //​set to trigger on falling edge
- start=ICP1; //record start of the pulse+ start=ICR1; //record start of the pulse
  }  }
  else  else
  {  {
  TCCR1B|=0x40;​ //​set to trigger on rising edge  TCCR1B|=0x40;​ //​set to trigger on rising edge
- if(!counter&​0x80) //​the lock bit isn't set, so we are free to run+ if(!(counter&​0x80)) //the lock bit isn't set, so we are free to run
  {  {
- diff=ICP1-start; //set the global volatile ​u16 diff + diff=ICR1; //set the global volatile ​s16 diff 
- if(start>​ICP1) //our pwm pulse spans a timer overflow+ if(start>​diff) //our pwm pulse spans a timer overflow
  {  {
  diff+=TOP_COUNT;​  diff+=TOP_COUNT;​
  }  }
 + diff-=start;​
  if(diff>​PULSE_MIN && diff<​PULSE_MAX) //​test against criterion  if(diff>​PULSE_MIN && diff<​PULSE_MAX) //​test against criterion
  {  {
- if(counter&​0xEF<30) //30 consecutive ​ pulses+ if((counter&​(~0x80))<30) //30 consecutive ​ pulses
  {   {
- counter+=3;​ //the 20ms timer1 overflow subtracts 2 from counter+ counter+=3;​ //the 20ms timer1 overflow subtracts 2 from counter
  }  }
  }  }
  else  else
  {  {
- counter&​=0xEF; //set the last 7 bits to zero+ counter&​=0x80; //set the last 7 bits to zero
  }  }
  }  }
  }  }
 } }
 +
 +void run_ground_control()
 +{
 + if((~0x80&​counter)>​=28)
 + {
 + counter|=0x80;​ //​lock the diff variable using the counter flag bit
 + OCR1B=diff;​
 + counter&​=~0x80;​
 + GROUND_LED_ON;​
 + }
 + else
 + {
 + GROUND_LED_OFF;​
 + }
 + if(counter&​~0x80) //​if the counter variable >0, decrement by 2
 + counter-=2;​
 +}
 +
 +void enable_ground_control()
 +{
 + TIMSK1|=(1<<​ICIE1);​
 + counter=0;
 +}
 +
 +void disable_ground_control()
 +{
 + TIMSK1&​=~(1<<​ICIE1);​
 + GROUND_LED_OFF;​
 + counter=0;
 + diff=0;
 +}
 +#endif
 </​code>​ </​code>​
  
code/ground_control.1225379317.txt.gz · Last modified: 2008/10/30 15:08 by laurenceb